HSGM
Therm Cutting
Machines
HSGM
Heissschneide-Geräte und –Maschinen GmbH
In der Rehbach 13
D-65396 Walluf
Tel:+49 (0) 6123-9978-0
Fax:+49 (0) 6123-9978-40
E-Mail:
info@hsgm.com
Rope and Belt
Cutting Machine
Type HSG-G2S-50/80/100-E
With our thermal cutting system it
is possible to cut synthetic
fabric, such as belts, bands and ropes to length. An electric
heated blade separates, in one phase of operation, the material
by
heat and seals the cut edges to avoid fringing of the cut edge.
For heat cutting we will use our proven cutting system with two
blades towards each
other without base.
Full
automatic function:
-
Material pull of from a roll or out of a barrel.
-
Length measuring.
-
Piece counter.
-
Cutting.
- Material turn
off.
Ratings:
Control : Control-Panel
(Siemens OP77A).
Conveying speed : 0 - 50 m/min. infinitely
adjustable.
Movement of
blade(s) : Pneumatic.
Belt width : 50 - 80 - 100 mm
(depending of type).
Belt thickness : 5 mm max.
Rope diameter : 10
mm max.
Length measure : 1 - 1000 m, adjustable by
the mm, indicated digital.
Piece counter : Total number can be programmed, machine stops operation when set number has been cut. Separate indication of pieces to cut in total and already cut pieces during operation,
indicated digital.
Operation : Fully
automatic, machine stops at end of fabric flow or malfunction.
Cutting element : Electric direct heated blade. Heating time approx. 90 sec. to 600°C.
Control : Programmable controller (PLC/SPS).
Temperature : 100 - 600°C.
infinitely variable.
Voltage : 230 Volt - 50/60Hz
Power input : 800 VA.
Air pressure : 6 bar.
Dimension : 700mm x 640mm x 615
mm (W x H x D); depending on type.
Weight : approx. 80 kg;
depending on type.
Options:
- Cold cutting with scissors system.
- Uncoiling if
required.