HSGM
Therm Cutting
Machines
HSGM
Heissschneide-Geräte und –Maschinen GmbH
In der Rehbach 13
D-65396 Walluf
Tel:+49 (0) 6123-9978-0
Fax:+49 (0) 6123-9978-40
E-Mail:
info@hsgm.com
|
Type HSG-C The thermcutting machine HSG-C is specially used to cut pp-small-band-fabrics for silo-bags (container bags). The heat cut edges do not fray or tear. Endless woven fabric can be opened without problems. The individual stations are connected in a modular system. This allows further components to be added or integrated (a printing machine for example). |
|
Ratings:
| Fabric width : | up to 2,2m - further widths on special request |
| Draw-off speed: | 60 m/min |
| Piece output : | L= 1,0 m-600 pcs./h. L =4,0 m- 360 pcs./h. L= 7,0 m-300 pcs./h. |
| Filling holes: | round, oval, straight or cross.slot |
| Control system : | storage programmable (SPS) |
| Temperature : | 100-700°C, infinitely variable. |
| Length measure : | from 0-100 m; setting by millimeter, digital display |
| Piece counter : | with preselector, digital display. |
| Edge control: | photoelectronic cell, sliding range +/- 100 mm |
| Voltage : | 380 V |
| Power input: | approx. 180 VA per each 10 cm blade section at 600°C. |
| Compressed air : | 6 bar |
