Seil- und Gurt-Ablängmaschine

HSGM
Therm Cutting Machines

HSGM Heissschneide-Geräte und –Maschinen GmbH
In der Rehbach 13
D-65396 Walluf
Tel:+49 (0) 6123-9978-0
Fax:+49 (0) 6123-9978-40
E-Mail: info@hsgm.com

Rope and Belt Cutting Machines

Type HSG-G
Type HSG-G2S
Type HSG-S

Leaflet (pdf)

With our thermal cutting system it is possible to cut synthetic fabric, such as belts, bands and ropes to length. To make holes in belting fabric can also be provided on special request.

An electric heated blade separates, in one phase of operation, the material by heat and seals the cut edges to avoid fringing of the cut edge.

For this functions we fabricate:

- Hand- and table-units with blade for manual use,

(see leaflet HEAT CUTTERS).

- Blade-stands semiautomatic

- Machines automatic

Our devices and machines are constructed in a mechanical assembly technique (MAT) and by this can be combined in many ways to meet our customers'individual needs.

Function automatic:

- Material pull of from a roll or out of a barrel.

- Length measure.

- Piece counter.

- Cutting.

- Material turn off.

Depending on type of fabric and ropes, belts or band, 3 different blade arrangement can be provided:

Cutting (perforating) on a cutting base (belts); HSG-G
Two blades towards each other without base (belts, bands, cords and ropes ); HSG-G2S.
Cutting in a ´bed´and pressing (ropes); HSG-S.

Ratings:

Control:	Control-Panel (OP)
Conveying speed:	0 - 50 m/min. infinitely adjustable.
Movement of blade(s) :	Pneumatic.
Belt width :	50 - 100 - 150 - 250 mm (depending of type).
Belt thickness:	5 mm max.
Rope diameter:	20 mm max.
Length measure :	1 - 1000 m, adjustable by the mm.
Indicator:	Digital.
Piece counter:	Total number can be programmed, machine stops operation when set number has been cut. Separate indication of pieces to cut in total and already cut pieces during operation.
Indicator :	Digital
Operation:	Fully automatic, machine stops at end of fabric flow or malfunction.
Cutting element:	Electric direct heated blade.
Control:	Programmable controller (PC/SPS).
Heating time:	In approx. 30 secs. to 600°C.
Temperature :	100 - 600°C. infinitely variable.
Voltage :	230Volt - 50/60Hz (110Volt-60Hz)
Power input :	800 VA
Air pressure:	6 bar.
Dimension :	approx. 1300 x 1250 x 460mm (w x h x d); depending on type.
Weight :	approx. 80 kg; depending on type.

Options:

cuts can be assembled in a kind of combined tools

- Shaped cuts.

- Perforation cuts .

- Multiple cuts are possible below definite premise.

- With pre-feed system for elastic material.

- Console for the machine – height can be selected.

- Pressing device.

- Swivel device for alternative rectangular/diagonal cut with adjustable cutting-angle.

- Marking device.

- Printing device.

- Coiling if required.

- Uncoiling if required.

- Pressing device.