ENGEL

SOLDERING GUNS

HSGM Heissschneide-Geräte und -Maschinen GmbH
In der Rehbach 13
D-65396 Walluf
Tel:+49 (0) 6123-9978-0
Fax:+49 (0) 6123-9978-40
E-Mail: info@hsgm.com

 

ENGEL Soldering Gun

Type B 50 Set

  • Off the line, rechargeable Ni-MH-Batteries
  • Heats up in 9 secs.
  • *) Up to 350 consecutive soldering operations
  • Up to 100 soldering joints if tip is allowed to cool off and
    reheated for every 2 soldering joints
  • Light fittings (1 or 2 lights attachable by choice)
  • Fully rechargeable at night in approx. 8 hrs or during breaks
  • Built-in charging control, overcharging impossible
  • Safety knob to prevent accidental operation
  • Operational indicator
  • Tip temperature approx. 350°C
  • Tip protected against erosion and oxidation
  • No disturbance to external voltage while soldering
  • Weight: 160g (with carton packaging 510g, with tool case 1095g)

*) This figure has been obtained 0,5mm Ø dia.
wire of electronic components without recharging the batteries.
The lighting reduces the soldering efficiency by approx. 7%
per blub. Total on-transition time per battery load is approx.
13 minutes.

         

 

Contents

1 ENGEL-Soldering Gun
1 Tip
1 Tip
1 Tip
1 Coil solder approx. 4g
1 Tip cover
2 Lights
1 Cleaning pad
1 Charging unit
1 Screw driver

1 Operating instructions

1 Carton packaging

  (also available in a plastic case)

 

 Type B 50 A
Type B 50 D
Type B 50 H
Type B 50 G

Type B 50 T
Type B 50 E
Type B 50 R
Type B 50 L

 


Accessories

Charging Cable B 50 K

  • For recharging of the ENGEL soldering unit
    B 50 SET from DC 12V sources.

  • The charging cable plug will fit all standard
    low voltage (DC 12V) cigarette lighter sockets
    in cars and boats fitted with negative ground.

  • As the recharging current is very low at
    approx. 0,15A there will be little drain only on
    the car battery even when the motor is not running.

Service-Box B 50 B
  • For secure storage of the ENGEL soldering unit
    B 50 SET in the tool bag
  • A safe place to deposit the ENGEL soldering unit
    B 50 SET during charging operation in cars and boats.
  • The indispensable, unbreakable case with the
    useful safety-lock.
  • Soldering unit, soldering tip, srewdriver and
    cleaning pad fit into the Service Box.

 

 

Spare Tips and Parts to ENGEL-Soldering Gun Models B50Set + S50

 

Tip Type B50H

Soldering area up to 1,5 mm²

 

Light Fitting

Type B50M

 

Tip Type B50D

Soldering area up to 2,5 mm²

 

Tip Cover

Type B50T

 

Tip Type B50G

Soldering area up to 6 mm²

 

 

Cleaning Pad

Type B50R

 

Lights

Type B50E

 

Charging Unit 

Model B50L

Voltage:

AC 110V-60Hz or

AC 230V-50Hz

Dimension: 87x60x50 mm