ENGEL

SOLDERING GUNS

HSGM Heissschneide-Geräte und -Maschinen GmbH
In der Rehbach 13
D-65396 Walluf
Tel:+49 (0) 6123-9978-0
Fax:+49 (0) 6123-9978-40
E-Mail: info@hsgm.com

 

ENGEL Soldering Gun

Type 100 S

 

The internationally approved and popular ENGEL soldering guns are high quality products which have been constructed with many years' experience. ENGEL soldering units meet both the high standard requirements of trade and industry as well as those of the amateurs and hobby electronics where there are required soft solder operations from time to time. Due to the quick preheating time - direct heating of the soldering tip - and quick cooling-off of the soldering tip, our soldering pistols are especially suitable for single joints as they are effected every day in the service business. 

 

 

 

          

 

 

  • Voltage: 230V; 50Hz
  • Power: 80 Watts
  • Heats up in 6 secs.
  • Ligth fittings
  • Protection class II (shockproof)
  • Weight: 1000g Gramm
    (
    Carton packaging 1160g, with tool case 1970g) 

 

The ENGEL soldering units have an energy saving function as the soldering tip is only heated as long as the operation switch is pressed down. This method also allows a certain temperature regulation. The operating switch cannot be locked while the unit is switched on. The units are equipped with a safety transformer which guarantees a high electric security. Further they are equipped with a built-in or attachable lighting to illuminate the soldering spot free of shade. All soldering tips can be exchanged easily. Our soldering units and the various shaped tips are suitable for multiple laboratory work, repair, assembling and hobby craft operations, f. i. such as at printed circuits or even at cross sections up to 12 mm².

 

Contents

1 ENGEL-Soldering Gun 100S
1 Tip Type 100WB
1 Coil solder approx. 4g
1 Brush (to clean tip)

1 Operating instructions

1 Carton packaging (also available in a plastic tool case)

 

Spare Soldering Tip and blade for ENGEL-Soldering Gun Model 100S

Soldering tip type 100WB

Soldering area up to 12mm²

Blade type C

to cut Styrofoam boards with thicknesses up to 30mm.