Type HSGM-ETC-180

Table model for vertical cutting of styrofoam material.

Following possibilities:
Vertical cuts up to 200 mm (8'') cutting height.

The table model for cutting of styrofoam material is used in the building and packing industry. The complete zinc plated working table is a steel frame with a sheet steel table top.
The cutting temperature is continuously adjustable by means of an adjusting knob. A transformer heats the hot knife in 10-15 secs. to approx. 600°C (1110°F). The power transformer is located under the operating plate.
The supports (clamps which hold the hot knife) are disconnected safely from the mains by means of a safety isolating transformer, according to the VDE 0570/EN61558 rules.

Printable version